It is possible to minimize finished basement cost with drywall when compared to the use of a plaster interior finish because the drywall is not only easier to install but it also has a lower average cost per foot. The drywall method for constructing interior walls and ceilings utilizes panels constructed from gypsum plaster that are compressed between two thick sheets of paper. The common technique for the creation of a plaster interior finish involves the placement of the different coats in consecutive layers by hand while the only manual labor required by the drywall is the finishing at the fasteners and joints. The Drywall Contractor also has a faster drying time aside from needing less manual labor. Therefore, these characteristics of the drywall result into a reduction in finish basement cost drywall when compared with the plaster interior finish.
Aside from offering the advantage of being much faster to install than the plaster interior finish, the drywall can also be setup using amateur carpenters. All of these things contribute to the finish basement cost drywall being much less when compared with the conventional plaster method. Another advantage of the drywall is that it has a relatively smoother finish and is therefore more beautiful to see. It also needs much less ceiling space, which is a plus factor for basements because they often have relatively low ceilings.
The drywall also presents the advantage of being fire resistant. The gypsum contains hydrates and when it is heated, the hydrates are converted into vapor. This has the effect of postponing the transfer of heat from one side to the other. What this means is that if there is a fire in the room next to the room with drywall, the temperature of the adjacent room cannot go higher than 100 degrees Centigrade. At least, this will last until such time that the gypsum has been utilized. And for those who require much more protection, there is the Type X drywall, where the gypsum also contains glass fibers.
Unfortunately, there is a downside to the drywall, particularly because it is porous and contains paper. This paper, which is made from cellulose, is a valuable food source of molds, It also readily absorbs moisture, which is another negative aspect of the drywall. And when the molds have succeeded in invading the pores, it is virtually impossible to get rid of them. The only way out would be to throw it away. What could even make the problem more complicated is that you do not immediately see the mold multiplying because they have entered the tiny pores of the drywall.
Nevertheless, if you consider that you can decrease your finish basement cost drywall, you may still choose this material because some of the disadvantages could be remedied. One such strategy is ensuring that the concrete walls and floor are waterproofed to lessen the moisture available to molds. You can also purchase some exhaust fans and a dehumidifier to make sure that the humidity is reduced to make the basement less conducive to the growth of molds and mildew.